Plywood reinforcing underneath floor overlays are opted for when abnormal static, pedestrian or trolley load is operated within the room. Where floor levels are raised, external and internal ramps are available.
Where shelving is full with heavy load, there is light trolley circulation or abnormal level of pedestrian traffic inside the room it is common for customers to opt for a 9mm or 12mm plywood insert between the insulation and the suitably chosen overlay. This increases the longevity and durability of the floor of the coldroom. The common overlay for this floor is either a 2mm aluminium chequerplate covering, or customers opt for an altro finish by their own chosen supplier.
Where common medium weight trollies are in circulation inside the coldroom it is recommended that an 18mm plywood insert is bonded between the insulation and the suitably chosen overlay. This increases the longevity and durability of the floor of the coldroom. The common overlay for this floor is either a 2mm aluminium chequerplate covering, or customers opt for an alto finish by their own supplier.
Where an abnormal rolling or static load such as pallets and pallet trucks are stored and operational within the coldroom 25mm plywood reinforcing between the insulation and the overlay. Our ‘pallet floors’ stand the test of time and using strong bonding adhesive and correct installation methods our floors do not lose shape over time. The most common overlay for this floor is a 4.5mm aluminium chequerplate floor covering.
Any overlay for an insulated floor is important to consider. The thickness and type is customisable to each room’s application. Where floor levels are raised, bespoke made external and internal ramps can be manufactured in each overlay for ease of access.
This overlay is never coupled with plywood reinforcing, as it is only for shelving and pedestrian use. Instead it is bonded to the insulated panel itself. The 5-bar pattern is intentionally specifically smaller to suit restaurants, pubs and retail outlets with an ‘easy-clean’ design.
Where light rolling loads are in action, or for a more industrial premises, 2mm aluminium anti-slip overlay is suitable due to its additional thickness it can increase longevity and durability of the coldroom floor.
Suitably coupled with 25mm plywood for heavy trolley and pallet use, this option stands the test of time for roll in blast chillers with industrial circulation.
